Tel: 86 577 67355010
Fax: 86 577 67027722
Email: hisun@goolevalve.com
regulator is not action. Fault phenomenon and the reasons are as follows:
1. No signal, no air. Gas source is not open, paying due to air water freezes in winter, cause the clogging in duct blockage or filter, pressure reducing valve failure, (3) compressor fault; (4) air duct leakage.
2. There are air, no signal. 1) regulator malfunction, (2) pipe leak signal; (3) locator corrugated pipe leakage; (4) adjust the retinal damage.
3. The locator without air. (1) filter clogging; (2) reducing valve fault I (3) pipe leakage or jam.
ZMAX (Q) series of pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures, namely one into two (shunt), two into a (confluent), so as to achieve the fluid mixing heating or cooling effect, or fluid from a shunt, meet the requirements of different conditions. The valve has the advantages of compact structure, in a light, sensitive action, small pressure drop loss, allowing the pressure high, new capacity is big, flow valve is accurate and convenient maintenance and so on, can be used in a variety of working conditions, temperature automatic control system and other industry control is especially suitable for the oil industry in the heat exchanger. The valve has closed (divided) flow type, (points) flow high temperature type and other types of. Product nominal pressure level of a user PN1.6, 4, 6.4; the valve nominal diameter range of DN25~400; leakage class II grade, IV grade; flow is characteristic for linear and equal percentage. A variety of different specifications are available.
the main technical parameters of the three-way valve
All diameter. |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
350 |
400 |
Seat diameter mm |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
350 |
400 |
Rated KV |
8.5 |
13 |
21 |
34 |
53 |
85 |
135 |
210 |
340 |
535 |
800 |
1280 |
1960 |
2560 |
Nominal pressure(MPa) |
1.6、2.5、4.0、6.4 |
|||||||||||||
Trip(mm) |
16 |
25 |
40 |
60 |
100 |
130 |
||||||||
The effective area of the film Ae (cm2) |
280 |
350 |
560 |
900 |
1400 |
piston-type |
||||||||
Signal range KPa |
20-100、40-200、80-240 |
|||||||||||||
Air pressure MPa |
0.1-0.4 |
0.4-0.7 |
||||||||||||
The inherent flow characteristics |
Linear, equal percentage, quick opening |
|||||||||||||
The inherent adjustable ratio |
30:1 |
|||||||||||||
The leakage class |
III、IV |
|||||||||||||
Flange size |
According to JB/79. (2) _94, HG20592_97, GB, ANSI, JIB, DIN and other standards |
|||||||||||||
Body material |
WCB, 304, 316, WC6, nickel, titanium, Hastelloy, Monel etc. |
|||||||||||||
Valve material |
304, 316, 420, nickel, titanium, Hastelloy, Monel etc. |
|||||||||||||
Working temperature ℃ |
-40~+230 ℃ (room temperature), +230~+450 ℃ (temperature), +450~+560 ℃, -40~-196 ℃ (high temperature) (low) |
Zhejiang Hisun Valve Co.,Ltd is a specialized manufacturer for different industrial control valves, ball valve, butterfly valve, gate valve, globe valve and related automation instrument. We have different workshops for those valves. As a ...Learn More
Add
HE-YI INDUSTRIAL PARK,OUBEI,WENZHOU,ZHEJIANG,CHINAPhone
TEL: 86 577 67355010 Fax: 86 577 67027722Copyright © 2016 Zhe Jiang Hisun Automation Instrument Co., Ltd